Used back beam measuring 96" long x 2 1/2" beam face with a 3" channel and bolt-on clip. Designed for compatible pallet rack applications.
Used Frazier cross aisle tie measuring 42" x 1 1/2" with a 2-Hole Clip. Rated capacity is 2,200 Lbs per pallet.
Used Steel King teardrop beam measuring 97" x 2 1/2" with pull-tab safety.
Used teardrop beam measuring 120" long x 3 3/4" beam face for compatible pallet rack applications.
Used Mecalux teardrop upright frame measuring 60" x 20' for pallet rack applications. Baseplate/connection: 4 1/2" x 6" - 2-Hole Plate.
Used wire deck measuring 60" x 46" with a 3-channel flared outside-waterfall design for compatible pallet rack systems.
Used structural beam measuring 99 1/2" x 4" for pallet rack applications. Connection: 12-Hole.
Used Interlake teardrop upright frame measuring 60" x 28' with a 3" column. Uses a 4 1/2" x 3" 4-Hole baseplate.
Used structural pallet rack beam measuring approximately 96" long x 3" beam face. Uses a 9" 8-hole end connector and shows normal warehouse-use paint wear.
Used slotted-rack wire deck measuring 48" x 68" with four support channels and no lip. Designed for compatible slotted rack applications.
Used 36" x 46" wire deck with an inside-waterfall design and three formed support channels for pallet rack decking applications.
Used teardrop beam measuring 96" long x 2 3/4" beam face for compatible pallet rack applications.
Used wire deck measuring 48" x 46" with a 3-channel inside-waterfall design for compatible pallet rack systems.
Used pallet support measuring 42" x 4 3/4" with a double-sided beam-lip connection for compatible pallet rack systems.
Used Frazier structural upright frame measuring 42" wide x 30' high with a 3" column face. Features a 5" x 7" bullnose front footplate and 5" x 4" rear footplate.
Used structural hybrid beam measuring 96" x 4" for pallet rack applications. Connection: 11" Clip - 10-Hole.
Used structural beam measuring 144" long x 3" beam face with a 2" clip offset and 3 holes in the beam face. Designed for compatible structural pallet rack systems.
Used Interlake Mecalux teardrop beam measuring 96" long x 2 3/4" beam face with 16 GA construction and a 3-pin connection.
Used pallet-flow section measuring 146" long x 3 1/2" with a single-wheel exterior configuration for compatible pallet-flow storage applications.
Used 36" x 46" outside-waterfall wire deck with heavier-gauge construction. Packaged 40 per bundle for pallet rack decking applications.
Used Frazier CorDeck measuring 204" x 26" with a gray finish for industrial decking and pallet rack applications.
Used teardrop upright frame measuring 42" wide x 20' high for compatible teardrop pallet rack applications.
Used wire deck measuring 36" x 46" with a 3-channel inside-waterfall design for compatible pallet rack systems.
Used structural beam measuring 96" long x 3" beam face with a 2" clip offset and 5 holes in the beam face. Designed for compatible structural pallet rack systems.
Used Ridg-U-Rak roll-formed teardrop beam measuring 104" long x 4" beam face. Orange beam uses two-pin end connections with pull-tab safety hardware and shows normal paint wear from handling and storage.
Used teardrop upright frame measuring 60" wide x 20' high for compatible pallet rack applications.
Used Elite teardrop upright frame measuring 24" wide x 92" high with 1 1/2" x 3" channel construction and 4" x 4" footplates. Blue frame shows normal warehouse-use wear; gauge remains TBD.
Used teardrop upright frame measuring 36" x 22' 4" for pallet rack applications. Baseplate/connection: 5" x 7".
New Hilti KB-TZ2 torque-controlled mechanical wedge anchor for concrete fastening applications. This 1/2" diameter x 5 1/2" long zinc-plated carbon steel anchor has an externally threaded shank with nut, washer, and expansion end.
